Cut out 10 each of the larger and smaller teardrop shapes (drops) from the paper. Inside the large drops cut out a teardrop shape with two tops. From a stiff piece of paper cut out a circle with a diameter of about 7 cm. Grease the drop with glue on one side of the hole and glue it together forming a pointed cone. Glue small drops in a similar way. To a circle of stiff card glue large cones so that their tops touch each other.
The lower part of the cones flatten, lubricate with glue and paste the small cones. Their center also flatten. From a square sheet of paper cut out a circle and cut it from the edge to the center. Slide the parts over each other and glue to form a cone slightly larger than the flattened center of the cones. Cut the edges of the cone and fold under the bottom, so that it fits into the flattened part of the snowflake. Brush the cut edges with glue and glue to the inside of the snowflake. The finished Snowflake can decorate, for example, our window.
- 4 white A4 sheets
- technical block